test_HMC_Clover_SF_Nf2.cpp

Go to the documentation of this file.

 
#include "test.h"
 
#include "Action/Fermion/action_F_Standard_SF.h"
 
#include "Fopr/fopr_Smeared.h"
 
#include "Force/Fermion/force_F_Clover_SF.h"
#include "Force/Fermion/force_F_Smeared.h"
 
#include "HMC/hmc_General.h"
#include "HMC/builder_Integrator.h"
 
#include "IO/gaugeConfig.h"
 
#include "Tools/file_utils.h"
#include "Tools/randomNumberManager.h"
#include "Tools/randomNumbers_MT19937.h"
 
//====================================================================
 
namespace Test_HMC_Clover_SF {
  const std::string test_name = "HMC.Clover_SF.Nf2";
 
  //- test-private parameters
  namespace {
    const std::string filename_input = "test_HMC_Clover_SF_Nf2.yaml";
  }
 
  //- prototype declaration
  int update_Nf2(void);
 
#ifdef USE_TESTMANAGER_AUTOREGISTER
  namespace {
#if defined(USE_GROUP_SU2)
    // Nc=2 is not available.
#else
    static const bool is_registered = TestManager::RegisterTest(
      test_name,
      update_Nf2
      );
#endif
  }
#endif
 
  //====================================================================
  int update_Nf2(void)
  {
    // #####  parameter setup  #####
    const int Nc   = CommonParameters::Nc();
    const int Nvol = CommonParameters::Nvol();
    const int Ndim = CommonParameters::Ndim();
 
    const Parameters params_all = ParameterManager::read(filename_input);
 
    const Parameters params_test       = params_all.lookup("Test_HMC_Clover_SF");
    const Parameters params_action_G   = params_all.lookup("Action_G");
    const Parameters params_fopr       = params_all.lookup("Fopr");
    const Parameters params_proj       = params_all.lookup("Projection");
    const Parameters params_smear      = params_all.lookup("Smear");
    const Parameters params_dr_smear   = params_all.lookup("Director_Smear");
    const Parameters params_integrator = params_all.lookup("Builder_Integrator");
    const Parameters params_hmc        = params_all.lookup("HMC_General");
 
    const string        str_gconf_status = params_test.get_string("gauge_config_status");
    const string        str_gconf_read   = params_test.get_string("gauge_config_type_input");
    const string        readfile         = params_test.get_string("config_filename_input");
    const string        str_gconf_write  = params_test.get_string("gauge_config_type_output");
    const string        writefile        = params_test.get_string("config_filename_output");
    const string        str_rand_type    = params_test.get_string("random_number_type");
    const unsigned long seed             = params_test.get_unsigned_long("seed_for_random_number");
    int                 i_conf           = params_test.get_int("trajectory_number");
    const int           Ntraj            = params_test.get_int("trajectory_number_step");
    const int           i_save_conf      = params_test.get_int("save_config_interval");
    const string        str_vlevel       = params_test.get_string("verbose_level");
 
    const bool   do_check        = params_test.is_set("expected_result");
    const double expected_result = do_check ? params_test.get_double("expected_result") : 0.0;
 
    const string str_action_G_type = params_action_G.get_string("action_type");
    const string str_fopr_type     = params_fopr.get_string("fermion_type");
    const string str_gmset_type    = params_fopr.get_string("gamma_matrix_type");
    const string str_proj_type     = params_proj.get_string("projection_type");
    const string str_smear_type    = params_smear.get_string("smear_type");
    // const int Nsmear                       = params_dr_smear.get_int("number_of_smearing");
    const int              Nlevels      = params_integrator.get_int("number_of_levels");
    const std::vector<int> level_action = params_integrator.get_int_vector("level_of_actions");
 
    const Bridge::VerboseLevel vl = vout.set_verbose_level(str_vlevel);
 
    //- print input parameters
    vout.general(vl, "  gconf_status = %s\n", str_gconf_status.c_str());
    vout.general(vl, "  gconf_read   = %s\n", str_gconf_read.c_str());
    vout.general(vl, "  readfile     = %s\n", readfile.c_str());
    vout.general(vl, "  gconf_write  = %s\n", str_gconf_write.c_str());
    vout.general(vl, "  writefile    = %s\n", writefile.c_str());
    vout.general(vl, "  rand_type    = %s\n", str_rand_type.c_str());
    vout.general(vl, "  seed         = %lu\n", seed);
    vout.general(vl, "  i_conf       = %d\n", i_conf);
    vout.general(vl, "  Ntraj        = %d\n", Ntraj);
    vout.general(vl, "  i_save_conf  = %d\n", i_save_conf);
    vout.general(vl, "  vlevel       = %s\n", str_vlevel.c_str());
    vout.general(vl, "  gmset_type   = %s\n", str_gmset_type.c_str());
    vout.general(vl, "  proj_type    = %s\n", str_proj_type.c_str());
    vout.general(vl, "  smear_type   = %s\n", str_smear_type.c_str());
    vout.general(vl, "\n");
 
    //- input parameter check
    int err = 0;
    err += ParameterCheck::non_NULL(str_gconf_status);
    err += ParameterCheck::non_negative(i_conf);
    err += ParameterCheck::non_negative(Ntraj);
    err += ParameterCheck::non_negative(i_save_conf);
 
    if (err) {
      vout.crucial(vl, "Error at %s: input parameters have not been set\n", test_name.c_str());
      exit(EXIT_FAILURE);
    }
 
    // if ( (Nsmear > 0) && (str_proj_type == "Stout_SU3") ) {
    if (str_proj_type == "Stout_SU3") {
      if (CommonParameters::Nc() != 3) {
        vout.crucial(vl, "check skipped: Nc = 3 is needed, but Nc = %d.\n\n", CommonParameters::Nc());
        return EXIT_SKIP;
      }
    }
 
 
    RandomNumberManager::initialize(str_rand_type, seed);
 
 
    // #####  object setup  #####
    Field_G U(Nvol, Ndim);
 
    if (str_gconf_status == "Continue") {
      GaugeConfig(str_gconf_read).read(U, readfile);
    } else if (str_gconf_status == "Cold_start") {
      GaugeConfig("Unit").read(U);
    } else if (str_gconf_status == "Hot_start") {
      GaugeConfig("Random").read(U);
    } else {
      vout.crucial(vl, "Error at %s: unsupported gconf status \"%s\"\n", test_name.c_str(), str_gconf_status.c_str());
      exit(EXIT_FAILURE);
    }
 
    GaugeConfig gconf_write(str_gconf_write);
 
 
    unique_ptr<Action> action_G(Action::New(str_action_G_type, params_action_G));
 
    //-- N_f=2 part
    unique_ptr<Fopr>  fopr(new Fopr_Clover_SF(params_fopr));
    unique_ptr<Force> force_fopr(new Force_F_Clover_SF(params_fopr));
 
    unique_ptr<Projection> proj(Projection::New(str_proj_type, params_proj));
    unique_ptr<Smear>      smear(Smear::New(str_smear_type, proj.get(), params_smear));
 
    unique_ptr<ForceSmear> force_smear(ForceSmear::New(str_smear_type, proj.get(), params_smear));
 
    unique_ptr<Director_Smear> dr_smear(new Director_Smear(smear.get(), params_dr_smear));
 
    unique_ptr<Fopr>  fopr_smear(Fopr::New("Smeared", fopr.get(), dr_smear.get()));
    unique_ptr<Force> force_fopr_smear(new Force_F_Smeared(force_fopr.get(), force_smear.get(), dr_smear.get()));
 
 
    unique_ptr<Action> action_F_Nf2(new Action_F_Standard_SF(fopr_smear.get(), force_fopr_smear.get()));
 
 
    ActionList actions(Nlevels);
    actions.append(level_action[0], action_F_Nf2.get());
    actions.append(level_action[1], action_G.get());
 
    std::vector<Director *> directors(1);
    directors[0] = static_cast<Director *>(dr_smear.get());
 
    unique_ptr<Builder_Integrator> builder(new Builder_Integrator(actions, directors, params_integrator));
    Integrator *integrator = builder->build();
 
    //- M series random number intialization
    // int ndelay = 200000;
    // RandomNumbers_Mseries rand(ndelay);
 
    //- Mersenne Twister for random number generator.
    //- for i_conf == 0
    // std::vector<unsigned long> seed(4);
    // seed[0] = 0x6a92;
    // seed[1] = 0x3708;
    // seed[2] = 0xab41;
    // seed[3] = 0x5c52;
    // RandomNumbers *rand = new RandomNumbers_MT19937(seed);
    unique_ptr<RandomNumbers> rand(new RandomNumbers_MT19937(i_conf));
 
    HMC_General hmc(actions, directors, integrator, rand.get(), params_hmc);
 
    Timer timer(test_name);
 
 
    // ####  Execution main part  ####
    timer.start();
 
    vout.general(vl, "HMC start: Ntraj = %d\n", Ntraj);
 
    double result = 0.0;
    for (int traj = 0; traj < Ntraj; ++traj) {
      vout.general(vl, "\n");
      vout.general(vl, "traj = %d\n", traj);
 
      result = hmc.update(U);
 
      if ((i_conf + traj + 1) % i_save_conf == 0) {
        std::string filename = FileUtils::generate_filename("%s-%06d", writefile.c_str(), (i_conf + traj + 1));
        gconf_write.write_file(U, filename);
      }
    }
 
    gconf_write.write_file(U, writefile);
 
    // if (Communicator::nodeid() == 0) {
    //   rand->writefile("rand_MT");
    // }
 
    timer.report();
 
    RandomNumberManager::finalize();
 
 
    if (do_check) {
      return Test::verify(result, expected_result);
    } else {
      vout.detailed(vl, "check skipped: expected_result not set.\n\n");
      return EXIT_SKIP;
    }
  }
} // namespace Test_HMC_Clover_SF